section-5a02a84
DIGITAL INTERCOMMUNICATION SYSTEM
In armoured vehicles (Tank/APC, Command & Control, Surveillance, Reconnaisance Vehicles) cIear and effective communication is essential.
ASELSAN Digital Intercommunication System with its electronic switching infrastructure provides internal communication between crew members and external communication over the radios which are connected to the system.
• Clear and Effective Voice Communication
• Up to 6 User Stations Connection
• Up to 6 Radios Connection/Control
• Digital Signal Processing and Switching
• Two-wire ISDN Interface Between User Stations
• External Wireless Connection in Vicinity of the Vehicle
• External Field Telephone or Remote Station Connection Possibility
• Easy to Configure Pre-Programmed Interfaces
• User Authorizaiton and Priority Assignment Capabilities
• Audio/Visual Alerts and monitoring
• Easy Operation and Maintenance
• Easy Integration and Installation
• Compatible with ZAMBAK Headsets which possesses ANR property
System Units
System configuration may vary in terms of quantity and usage of each unit, depending on the application. The 6680 series consists of the following items;
• MB-6680 Main Unit (Commander),
• SB-6681 System Unit (Operator/Gunner/Team Commander),
• SB-6682 System Unit (Driver),
• SB-6683 System Unit (External lnfantry),
• SB/K-6685 System Unit/WIU (*) (Gunner, Operator, Driver)
• UB-6681 Remote Unit (Remote lnfantry),
• Headset,
• Handset,
• Loudspeaker,
• Lamp Set
(*) Wireless Interface Unit : WIU
User Interface
Accessories
• Headset
• Loudspeaker
• Handset
• Warning Lamp
Control / Monitor
• Function Control: Power on/ off and radio transmission limitation
• Network Control: Radio or Intercom Nets Selection
• External Access/Control: With wired external or remote user station or wireless user station
• Radio or Intercom Control: Via Headset/Handset/External Switch
• Radios and User stations status monitoring
• Volume Control: Earphone and Loudspeaker audio level adjustment
Radio Interface
• Communication
• Mic. line level : Max. 100 mVrms at 100 Ohm load
• Audio line level : Max. 4 mW at 1000 Ohm input impedance
• Control : Control of radio’s mode of operation
Unit Interface
• Physical connection : Two-wire cable Communication
• System Units : Digital, ISDN-U interface (2B+D)
• Remote Unit : Analog, DTMF signalling
Control lnterface
• Configuration setting can be monitored with a PC via V.24 port of the Main Unit
Power Requirements
• Supply : 22-33 V DC
• Consumption : 19.2 W Average 48W Maximum (*)
(*) maximum power is observed when the remote unit is called and the warning lamp is lit.
Environmental Conditions
• Ope. temp. range : -40°C to +55°C (for SK/B-6685 -20°C to + 55°C)
• Storage temp. range : -50°C to +60°C (for SK/B-6685 -30°C to +60°C)
